|
CORNER RADIUS KITS |
|
Produce eight(8) different sized radius corners equally and easily. *Self-Contained Unit means fast easy set-up *Requires a vertical hit from any type press *Punch material up to 13 gage mild steel (10 gage if material is clamped.)
Precision self-aligning punches and dies allows for 30 second changeovers. Shut ht. 3 1/8 • Base 5” x 6 1/4 • box 10 1/2 x 6 1/2 • wgt 13 lb. |
|
Inch Unit:*E-RK1001 1/16, 1/8, 5/32, 3/16, 1/4, 3/8, 7/16, 1/2 Metric Unit:*ERK1001 2mm, 3mm, 4mm, 5mm, 6mm, 8mm, 10mm, 12mm |
|
EVENTS:
Please make your plans to visit us at Booth # 4042
|
|
The Corner Radius Kit takes the “Pain” out of corner rounding. This unique, self-contained unit requires only a vertical “hit” from a mach. press, brake, etc... |
|
(soft hammer on a bench for short runs) to produce clean corner radii on sheet stock up to 13 gage mild steel. 10 gage if material is clamped to prevent pushing away from radius kit gaging. |
|
October 6 - 8, 2008 |