Acro-Hyde™ is a urethane film, prevents die marks on materials like stainless,

 aluminum, and other polished stocks.  Reduce your costs from secondary polishing

 or from having to scrap out parts.  Simply cut sheet to required length, lay it on top of

 the bottom die, secure one side with double faced clamping tape and you’re set.

URETHANE Brake Press Products

Acroform™ Inserts • These triangular shaped K·Prene® insert converts steel “V” dies into non-marring,

versatile bottom dies.  Under pressure from a punch, the urethane takes the shape of a variety of punch tips and

 in the process produces a variety of scratch free, accurate bends.  Stocked in K-950A (other durometers available)

in 1 foot increments to 4 foot maximum lengths. Simply position the correct sized urethane insert in 1” or 2” steel

“V die, using lengths that allow 2” to extend beyond the end of the part to be formed.   For maximum life, do not

penetrate any further than is needed to produce the desired bend.  Penetrating to a depth of more than 30% of the

                                          height of the Insert can significantly reduce its effective life. 

                                           Note: Spring back problems are reduced and it allows you to form different material

                                                      thickness without having to change dies.

Next Page

Home | Products & Literature | Punch Tool Catalogs | News & Upcoming Events